Capacity Specifications

Gear Oil Capacities

Transmission with Combined Oil System:

• The oil spaces in the front final drive and transfer case are combined together via the return line - 2 -, supply line - 4 - and protective pipe - 5 -.





• The side shaft runs in gear oil in the protective pipe.

• An additional heat exchanger for transmission oil cooling - 1 -for transfer case - 3 - and front final drive - 6 - is attached to the transmission.

There is approximately 300 ml of additional gear oil in the transmission oil cooling heat exchanger - 1 - with supply and return line, follow oil level check exactly.

Front Final Drive






Allocation of various gear oil part numbers to corresponding transmission code:


• Various types of gear oil are available for this transmission. These are allocated to the transmission codes.

• Other oils can cause malfunctions or transmission failure.

Gear oil level in front final drive, checking and topping off => [ Front Final Drive, Transmissions with Separate Oil Systems, Filling after Repair ] Front Final Drive, Transmissions With Separate Oil Systems, Filling After Repair.

Transfer Case






Allocation of various gear oil part numbers to corresponding transmission code:


• Various types of gear oil are available for this transmission.

• Other oils can cause malfunctions or transmission failure.

Transfer case, checking and filling gear oil, refer to => [ Gear Oil Level in Transfer Case, Transmissions with Separate Oil System, Checking ] Gear Oil Level In Transfer Case, Transmissions With Separate Oil System, Checking.