Four-Way Lumbar Support Assembly Overview

Four-Way Lumbar Support Assembly Overview

• The cover with upholstery in the backrest is not shown for clarity purposes.





1 Four-Way Lumbar Support

• Removing and installing, refer to => [ Four-Way Lumbar Support ] Power Front Memory Seats

2 Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

• Removing and installing, refer to => [ Lumbar Support Curvature Adjustment Motors ] Power Front Memory Seats

3 Clip

• For release cable guide, refer to => [ (Item 4) Release Cable ]

4 Release Cable

• For adjusting lumbar support

• Can only be replaced with Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

5 Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

• Removing and installing, refer to => [ Lumbar Support Height Adjustment Motors ] Power Front Memory Seats

6 Backrest Frame

7 Rivet

• Rivet using special pop rivet pliers (V.A.G 1753A)

• Before riveting, a plastic washer must be placed between lumbar support and backrest frame => [ (Item 10) Plastic Washer ]

8 Release Cable

• For adjusting lumbar support

• Can only be replaced with Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

9 Clip

10 Plastic Washer

• between four-way lumbar support and backrest frame

11 Retaining Plate

12 Retainer

13 Cable Tie