Air Injection Pump: Service and Repair

Secondary Air Injection Pump

Removing

• All cable ties opened or cut during engine removal must be reinstalled at the same locations during installation.

- Open the quick-release fasteners - 1 - and remove the front noise insulation.





- Separate the electrical connector - 1 -.





- Remove air guide hoses - 4 - and - 5 - from secondary air injection pump by pressing release buttons.

- Remove nut or bolts - 2, 3, 6 - and remove secondary air injection pump.

Installing

Installation is in reverse order of removal, note the following:

• During installation, all cable ties must be re-installed at the same location.

Tightening Specifications