Air Injection Pump: Service and Repair

Secondary Air Injection Pump

Removing

• During installation, all cable ties must be re-installed at the same location.

- Remove sound insulation by loosening securing pieces - 1, 2 and arrow -.





- Remove air guide hoses - 1 and 3 - from secondary air injection pump by pressing release buttons.





- Disconnect electrical connector - 2 -.

- Remove nuts - arrows - and remove secondary air injection (AIR) pump from bracket.

Installing

• Tightening Specifications => [ Secondary Air Injection System Assembly Overview ] Service and Repair.

Installation is in reverse order of removal, note the following:

• During installation, all cable ties must be re-installed at the same location.