Rear Side Door Window Inner Sealing Strip Replacement

Rear Side Door Window Inner Sealing Strip Replacement

Removal Procedure

1. Lower the rear door window.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair




3. Lift the rear door window inner belt sealing strip off of the weld flange.

Installation Procedure





Important:
* Ensure the rear end of the strip is inserted into the gap formed by the weatherstrip and the door inner panel.

* Ensure the rear end of the strip is flush to the rear leg of the weatherstrip.

* Ensure the rear end of the strip does not interfere with the path of the window.


1. Install the rear door window inner belt sealing strip to the weld flange, pressing firmly until fully seated.
2. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement Service and Repair
3. Raise the rear door window.