Exhaust Manifold Installation (Right Side)

EXHAUST MANIFOLD INSTALLATION (RIGHT SIDE)





1. Install the exhaust manifold gasket to the cylinder head.
2. Install the exhaust manifold to the cylinder head.

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Install the exhaust manifold nuts.
^ Tighten the nuts to 18 Nm (13 ft. lbs.).





4. Install the exhaust manifold heat shields.
5. Install the exhaust manifold heat shield nuts.
^ Tighten the heat shield nuts to 9 Nm (80 inch lbs.).





6. Install the right heated oxygen sensor into the exhaust manifold.
7. Install the heated oxygen sensor electrical connector to the lift bracket.
^ Tighten the heated oxygen sensor to 42 Nm (31 ft. lbs.).