Ash Tray Lamp: Service and Repair

Ashtray Lamp Bulb Replacement

Removal Procedure





Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the console cover.
3. Remove the screws and the ashtray housing.




4. Remove the bulb from the ashtray lamp housing.
5. Disconnect the bulb from the ashtray lamp housing electrical connector.

Installation Procedure




1. Connect the replacement bulb to the ashtray lamp housing electrical connector.
2. Install the replacement bulb into the ashtray lamp housing.





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

3. Install the ashtray housing with the screws.

Tighten the ashtray housing screws to 2.5 Nm (22 lb in).

4. Install the console cover.
5. Connect the negative battery cable.