Seat Belt: Service and Repair

Shoulder Belt Replacement - Rear

Removal Procedure




1. Remove the rear window shelf panel. Refer to Trim Panel Replacement - Rear Window Shelf Trim Panel Replacement - Rear Window Shelf in Interior Trim.
2. Remove the rear seat belt retractor securing bolts (LH, CENTER, RH) from the back panel.




3. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear Seat Cushion Replacement - Rear in Seats.




4. Remove the floor seat belt anchor bolts.
5. Remove the seat belt.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the floor seat belt anchor bolts.

Tighten the floor seat belt anchor bolt to 38 Nm (28 lb ft).




2. Install the rear seat belt retractor bolts (LH, CENTER, RH) on the back panel.

Tighten the rear seat belt retractor bolts to 38 Nm (28 lb ft).




3. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear Seat Cushion Replacement - Rear in Seats.
4. Install the rear window shelf panel. Refer to Trim Panel Replacement - Rear Window Shelf Trim Panel Replacement - Rear Window Shelf in Interior Trim.