13. Brake F, Slotted Nut Removal

Brake F, Slotted Nut Removal

Tools Required

DT 46474 (DW260-060) Brake F Cup Spring Compressor

Removal Procedure





Caution: Refer to Safety Glasses Caution Safety Glasses Caution in Cautions and Notices.

1. Remove the side shaft. Refer to Side Shaft Removal 11. Side Shaft Removal.
2. Remove the disc set.




3. Remove the brake F inner disc carrier.




4. Mount the DT 46474 (1). Remove the brake F split stop ring.




5. Remove the fixture. Remove the cup spring.




6. Release the piston F by applying compressed air to the bore.





Important: The bearing set is tight. Press the bearing plate upward from underneath to remove.


7. Remove piston F and the bearing plate with the spur gear.