Timing Chain & Sprockets - Installation

INSTALLATION





1. Slide the crankshaft sprocket (1) on the crankshaft.





2. Position the timing chain onto the crankshaft sprocket and align the timing marks.





3. Position the timing chain onto the camshaft sprocket and align the camshaft timing marks and install the camshaft sprocket on the camshaft.
4. Install the camshaft retaining bolt finger tight.





5. Install the timing chain guide (1) and tighten bolts (2) to 12 Nm (9 ft. lbs.).





6. Install the timing chain tensioner (2) and tighten bolts (3) 12 Nm (9 ft. lbs.).





7. Verify the timing marks (1,2) are aligned correctly.





8. Remove the timing chain Tensioner Pin 8514 (1).





9. Tighten the camshaft sprocket bolt (1) to 122 Nm (90 ft. lbs.).





10. Install the oil pump (1) Removal and Replacement
11. Install the timing chain cover Engine Timing Cover(s) - Installation
12. Fill the engine with oil.
13. Fill the cooling system Service and Repair
14. Connect the negative battery cable.
15. Start the engine and check for leaks.