Front Disc Brake Disc with High Performance Brakes

Brake Disc

Removal

CAUTION: Brake discs must be renewed in pairs, unless one disc requires changing before 1000 miles (1600 kilometers) from new.
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the front brake pads. For additional information, refer to Brake Pads - Vehicles With: High Performance Brakes Front Disc Brake Pads with High Performance Brakes




3 Remove the brake caliper anchor bracket.
- Remove and discard the 2 bolts.




4 Remove the brake disc.
- Remove the 2 clips.

Installation





1
WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Install the brake disc.
- Clean the component mating faces.
- Secure the clips.




2
CAUTION: Make sure that new bolts are installed.
Install the brake caliper anchor bracket.
- Clean the component mating faces.
- Tighten the bolts to 115 Nm.
3 Install the brake pads. For additional information, refer to Brake Pads - Vehicles With: High Performance Brakes Front Disc Brake Pads with High Performance Brakes