Floor Console Finish Panel

Floor Console Finish Panel

Removal
1 Depress the footbrake and move the gear selector lever to NEUTRAL.




2
CAUTION: Care must be taken to avoid damage to the mating surfaces.
Release the floor console veneer trim panel.
- Carefully release the 8 clips.




3 Remove the floor console veneer trim panel.
- Disconnect the engine START/STOP switch electrical connector.
- Disconnect the automatic speed limiter (ASL) switch electrical connector.




4
NOTE:
Do not disassemble further if the component is removed for access only.
NOTE:
Note the fitted position.
Remove the switches.
- Depress the 2 retaining clips.




5 Remove the gear selector lever surround trim panel.
- Remove the wire clip.

Installation
1 Install the gear selector lever surround trim panel.
- Install the wire clip.
2 Install the switches.
3 Install the floor console veneer trim panel.
- Connect the electrical connectors.
- Carefully align and secure the clips.
4 Return the gear selector lever to PARK.