Front Disc Brake Disc with Standard Brakes

Brake Disc

Removal

CAUTION: Brake discs must be renewed in pairs.
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the front brake pads. For additional information, refer to Brake Pads - Vehicles With: Standard Brakes Front Disc Brake Pads with Standard Brakes




3 Remove the brake caliper anchor plate.
- Remove and discard the 2 bolts.




4 Remove the brake disc.
- Remove the 2 clips.

Installation
1
WARNING: Do not use compressed air to clean brake components. Dust from friction materials can be harmful if inhaled.
Install the brake disc.
- Clean the component mating faces.
- Secure the clips.
2 Install the brake caliper anchor plate.
- Clean the component mating faces.
- Tighten the bolts to 115 Nm (85 lb.ft).
3 Install the brake pads. For additional information, refer to Brake Pads - Vehicles With: Standard Brakes Front Disc Brake Pads with Standard Brakes