Satellite Digital Audio Receiver System (SDARS) Module

Satellite Digital Audio Receiver System (SDARS) Module









Removal and Installation

NOTE: This procedure applies to vehicles without navigation only. For vehicles with navigation, the Satellite Digital Audio Receiver System (SDARS) module is integral to the Audio Control Module (ACM).

1. NOTE: Module configuration is required when a new SDARS module is being installed.

Upload the SDARS module configuration information to the scan tool.

2. Remove the center console.

3. Remove the 4 screws and the SDARS module.
- Disconnect the electrical connectors.

- To install, tighten the screws to 8 Nm (71 lb-in).

4. To install, reverse the removal procedure.
- Download the configuration information to the SDARS module.