Removal

HEATING / AIR CONDITIONING: COMPRESSOR (for 2GR-FE): REMOVAL

1. RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM Service and Repair

2. REMOVE RADIATOR ASSEMBLY

Removal

3. REMOVE FRONT FENDER APRON SEAL RH

4. REMOVE V-RIBBED BELT Removal

5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

(a) Disconnect the 3 connectors.





(b) Disengage the 2 clamps.

(c) Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor and magnetic clutch.





(d) Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the suction hose sub-assembly from the compressor and magnetic clutch.





(b) Remove the O-ring from the suction hose sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

7. REMOVE COMPRESSOR AND MAGNETIC CLUTCH





(a) Remove the 4 bolts and compressor and magnetic clutch and bracket.