Ignition Coil: Service and Repair

Ignition Coils with Power Output Stages

Special tools, testers and auxiliary items required

• Ignition coil puller (T40039)

Removing

• To remove the spark plugs, place the (T40039) on the top most thick rib - arrow - of the ignition coil with power output stage.





• The lower ribs may be damaged if they are used.

- Pull all the ignition coils approximately 30 mm out of the spark plug holes using the (T40039).





- Disengage the electrical connectors - arrows - and pull all the connectors simultaneously from the ignition coils.





Installing

- Insert all ignition coils loosely into the spark plug holes.

- Align the ignition coils to the electrical connectors - arrows - and connect all the connectors to the ignition coils simultaneously.





- Align the ignition coils to the recesses in the cylinder head cover.

- Press the ignition coils evenly onto the spark plugs by hand.