Side Turn Signals

Side Turn Signals

• Removing and installing is described only for the left side turn signals. Removing and installing right side turn signals is similar

• LEDs with a long service life are installed in the side turn signals instead of standard bulbs.

• Because of that, it is not necessary to replace bulbs. If there is damage, the entire turn signal assembly must be replaced.

Removing

- Mirror Glass, Removing => [ Exterior Mirror Glass ] Exterior Mirror Glass

- Remove mirror housing => [ Exterior Mirror Housing ] Exterior Mirror Housing

- Remove trim => [ Trim ] Trim





- Remove screws - 4 - and remove assembly piece - B - downward.

- Disconnect harness connector - 5 - from turn signal - 3 -.

- Remove screws - 2 - and remove turn signal - 3 - from assembly piece - 1 -.

Installing

To install, perform the steps used for removal in reverse order.

• Then perform a function test.