Clean Working Conditions

Clean Working Conditions

Even minor contaminations can lead to malfunctions in the fuel injection system. When working on the fuel supply/injection system, pay careful attention to the following rules of cleanliness:

• Thoroughly clean all connections and the surrounding area before disconnecting.

• Place removed parts on a clean surface and cover. Use lint-free cloths.

• Carefully cover over opened components or seal, if repairs are not performed immediately.

• When the system is open, do not work with compressed air. Do not move vehicle unless absolutely necessary.

• Install clean components: Remove replacement parts immediately prior to installation. Do not use parts that have been stored unpacked (e.g. in tool boxes etc.).

• Separated electrical connectors: Protect from dirt and moisture. Make sure connections are dry when reconnecting.