Air Cleaner Housing: Service and Repair

Air Filter Housing Overview






1 Regulator Flap

• Only on cold climate vehicles.

• With a thermal element.

• Intake air pre-heating checking. Refer to => [ Intake Air Pre-Heating, Checking ] Testing and Inspection.

2 Bolt

• 2 Nm

3 Connecting Pipe

• To the throttle valve control module.

4 Air Filter Element

5 Mass Airflow Sensor (G70)

6 Seal

• Replace if damaged.

7 Upper Air Filter Housing

8 Bolt

• 2 Nm

9 Connection

• Clipped into the upper air filter housing.

10 Nut

• 8 Nm

11 Cover

12 Air Duct

• Fastened to the lock carrier.

13 Bolt

• 5 Nm

14 Gasket

• Replace if damaged.

15 Rubber Bushing

16 Bolt

• 10 Nm

17 Bracket

• For the air filter housing.

18 Connection

• Not installed on all vehicles.

• For the warm air intake.

19 Lower Air Filter Housing