Electronic Steering Column Lock Control Module (J764)

Electronic Steering Column Lock Control Module (J764)

Special tools, testers and auxiliary items required

• Socket Insert (T10424)

Removing:

• The electronic steering column lock control module is secured to the steering column with shear bolts.

• The Vehicle Diagnosis, Testing and Information System (VAS5051B) provides all of the information about the remainder of the procedure.

• If electronic steering column lock control module is to be replaced, the work procedure => [ Electronic Steering Column Lock Control Module, Adapting ] Electronic Steering Column Lock Control Module (J764), Adapting must always be performed beforehand.

• Additional information is available in TSB 2022458/2.

- Remove steering column with electronic steering column lock control module.

- Carefully tighten the steering column in the vise - 1 - using protective backings and pivot the universal joint - 2 - downward.





- Remove the lower shear bolt from the electronic steering column lock control module using (T10424).

• Remove any shavings with a brush. Otherwise, damage could result.

- Loosen the vise and rotate the steering column 180°.

- Tighten the vise and pivot the universal joint - 2 - downward.

- Remove the lower shear bolt - arrow - from the - electronic steering column lock control module - using (T10424).





• Remove any shavings with a brush. Otherwise, damage could result.

• Rotating 180° is necessary to prevent any shavings from enter the steering column from above when removing the shear bolt.

Installing:

- Secure the electronic steering column lock control module - 1 - with new shear bolts - arrows -. Tighten the shear bolts evenly until the heads shear off.





- Install the steering column with the electronic steering column lock control module.