Front Wheel Housing Liner

Front Wheel Housing Liner

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1783)

• The following describes removing and installing the left front wheel housing liner. Removing and installing the right front wheel housing liner is identical.

• Due to equipment variations, small deviations must be considered during removal and installation.

Removing






- Remove the wheel.

- Remove the bolts - 2 -.

- Remove the wheel housing liner - 1 - from the fender.

Installation






• Check the expanding nuts for damage and replace if necessary. Refer to => [ Front Wheel Housing Liner Expanding Nuts Assembly Overview ] Front Wheel Housing Liner Expanding Nuts Assembly Overview.

- Push the front wheel housing liner - 1 - into the noise insulation. Refer to => [ Noise Insulation ] Description and Operation.

- Align the front wheel housing liner - 1 - with the front bumper cover.

- Align the front wheel housing liner - 1 - with the noise insulation.

- Tighten the front wheel housing liner - 1 - at all the attaching points. Refer to => [ Front Wheel Housing Liner Assembly Overview ] Front Wheel Housing Liner Assembly Overview.

- Install the wheel.