Function 10 - Adaptation

General Information

The new seat adjustment with memory generation features On Board Diagnostic (OBD) capability. The control module for seat adjustment with memory is equipped with a DTC Memory.

Malfunctions occurring in monitored components/wiring are stored in DTC memory together with an indication of the type of malfunction.

If any control elements are replaced they must be adapted and a basic setting must be initiated => [ Seat Control Element, Basic Setting ].

On Board Diagnostic (OBD), initiating program

Test requirements:

• Voltage supply and fuses for appropriate systems OK.

• Connecting scan tool (VAS5051) => [ VAS 5051, Connecting ] VAS 5051, Connecting

• Switch ignition on.

• If no display appears, use wiring diagram to check power supply for (VAS5051)

• Additional operating instructions can be called up by pressing the Scan Tool HELP button.

• The next step in the program sequence can be selected by pressing the -> button.

• Incorrect entries can be terminated by pressing the C button..

- Switch on printer by pressing Print button (indicator lamp in button lights up).

- Press button 1 for "Rapid data transfer".

Indicated on display:

Rapid data transfer HELP
Enter address word XX

Function 10 - Adaptation

Requirements:

• Connect Scan Tool (VAS5051) (ST) => [ VAS 5051, Connecting ] VAS 5051, Connecting.

• Switch on ignition.

Implementing Function, 10 - Adaptation

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 1 and 0 to select " Adaptation".

Indicated on display:

Rapid data transfer Q
10 - Adaptation

- Confirm entry with Q button.

Indicated on display:

Adaptation
Feed in channel No. XX

- Press buttons 8 and 1 to select " Channel" 81.

• Incorrect entries can be corrected after pressing the C key.

- Confirm entry with Q button.

Indicated on display:

Channel 81 Adaptation 1 ->
< PIN ? -1 3->

- Enter 20771 and press the -> button.

Indicated on display:

Channel 81 Adaptation 20771 ->


- Press the -> button.

Indicated on display:

Channel 81 Adaptation 20771 Q
Store changed value?

- Confirm input with Q button.

Indicated on display:

Channel 81 Adaptation 20771 ->
Changed value is stored.

- Press the -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons 0 and 6 to select " End output".

If the Adaptation value (PIN) is incorrectly entered three times, the Adaptation function will be disabled.

Indicated on display:

Channel 81 Adaptation 00000 Q
Disabled 10

The current disabled time in minutes (e.g. 10) is indicated in field 2, on the bottom line.

- Press the Q button.

- Initiate Adaptation again after the indicated disabled time has elapsed.

If Adaptation is performed and no new vehicle data is available, the following appears:

Indicated on display:

Channel 81 Adaptation 00000 ->
Bus not OK

- Press the -> button.

In this case, Adaptation is not necessary.