Basic Setting After Removing and Installing Seat Control Module or Motor

Power Front Memory Seats

• From 06.2006, the usual wiring harness routing to connector station under front seat. Refer to => [ Connectors, Disconnecting ] Front Seats has been replaced with modular wiring routing => [ Modular Wiring Routing Assembly Overview, from June 2006 ] Front Seats.

• The modular wiring routing has not been implemented for all countries.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular. Refer to => [ Modular Wiring Routing Versions ] Front Seats.

Basic Setting after Removing and Installing Seat Control Module or Motor

• Perform a basic setting in Guided Fault Finding if a new seat control module or a new motor for the seat forward/backward or a new head restraint motor was replaced.