Driver Side E-Box

Relay and Fuse Panels

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

Driver Side E-Box

Removing

- Remove driver's seat.

- Remove A-pillar trim.

- Fold back floor carpet.

- Disengage cover for driver's side electronics box - arrows - and fold cover to the right.





- Remove control modules.

• Check the exact assignment for driver side electronics box in the current wiring diagram.

•

Installing

Installation is the reverse of removal.