Front Backrest Assembly Overview

Power Front Memory Seats, S6

Versions for specific countries: vehicles from 08/06

• Modular wiring routing came into effect with series production of seats.

• Check version of front seat and of vehicle and perform repairs accordingly.

• Note the two possible versions of the modular wiring routing, Modular Light or Modular => [ Modular Wiring Routing Versions ] Standard Front Seats Overview.


Front Backrest Assembly Overview





1 Front backrest

• Removing and Installing => [ Front Backrest ] Power Front Memory Seats, S6

2 Screw, self-locking

• 35 Nm

• Qty. 4

• Replace

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

3 Retaining strip

• Securing on rear tunnel side trim panel

4 Belt webbing

• Engaged with strap in seat pan upper frame

5 Wiring harness

• For side airbag

6 Wiring harness

7 Cover strips

• With straps (Qty. 3) for engaging in backrest

8 Wiring harness

9 Belt webbing

• Engaged with clip in seat pan upper frame

10 Belt webbing

• Engaged with clip in seat pan upper frame

11 Retaining strip

• Attachment on tunnel side trim

12 Spacer plate

• Between backrest stop and upper retaining bracket

13 Upper retaining bracket

• Removing and Installing => [ Upper Retaining Bracket ] Power Front Memory Seats, S6

14 Bolt

• 3.5 Nm

• Qty. 2

15 Front retaining bracket

• Removing and Installing => [ Front Retaining Bracket ] Power Front Memory Seats, S6

16 Seat pan