Wheel Alignment Measurement Preparations

Wheel Alignment Measurement Preparations

Special tools, testers and auxiliary items required

• Brake pedal actuator (V.A.G 1869/2)

• Level Regulating Tool (V.A.G 1925)

• Adapter (V.A.G 1925/3)

• Adapter (V.A.G 1925/4)

• Adapter (V.A.G 1925/6)

• Vehicle Diagnosis, Testing and Information System (VAS 5051 B)

• Diagnostic Cable (VAS 5051/5A)

• Bolt for steering centering (VAS 6224)

• Wheel alignment computer

• The measurement sensor must be properly adjusted and attached to the vehicle; observe device manufacturer's operating instructions.

• Make sure that the sliding plates and turn tables are not touching the end stop when checking the wheel alignment.