Sunroof / Moonroof Weatherstrip: Service and Repair

Sunroof Glass Panel Seal Replacement

Removal Procedure




1. Remove the sunroof glass panel. Refer to Sunroof Glass Panel Replacement (Service and Repair).
2. Remove the sunroof glass seal from the sunroof glass panel frame by peeling the sunroof glass seal away at one point and continuing around the perimeter of the sunroof glass panel frame.
3. Wipe the perimeter of the sunroof glass panel frame area with a clean, dampened cloth using GM Window Cleaner GM P/N 1050427 or isopropyl alcohol to clean the surface of the perimeter of the sunroof glass panel.

Installation Procedure




1. Position the sunroof glass panel seal onto the sunroof glass panel frame.

Important: Ensure that the sunroof glass seal is properly seated around the entire perimeter of the sunroof glass panel frame.


2. Firmly press the sunroof glass seal into place.
A small rubber hammer will help in the installation.
3. Install the sunroof glass panel. Refer to Sunroof Glass Panel Replacement (Service and Repair).