EGR Valve Replacement (Pipe)

Removal Procedure



1. Remove bolt at water pump housing (3).
2. Raise and support the vehicle.
3. Remove the Crossover Exhaust Pipe.
4. Remove the nut from Crossover Exhaust Pipe (5).
5. Remove the EGR Valve Pipe (6).

Installation Procedure
1. install Crossover Exhaust Pipe.

Notice: Refer to Fastener Notice in Service Precautions.




2. Install EGR Pipe Nut to Crossover Exhaust Pipe (5).
Tighten the EGR Pipe Nut to 60 N.m (44 lb ft).
3. Lower the vehicle.
4. Install bolt at waterpump housing (3).
Tighten the waterpump housing bolt to 24 N.m (18 lb ft).