Windshield Side Reveal Molding Replacement

REMOVAL PROCEDURE

Windshield Side Reveal Molding Replacement: Removal Procedure:

1. Starting at the bottom of the reveal molding (1), pull the molding off of the windshield pillar flange.
2. Disengage the tab at the top of the molding by sliding it out of the upper reveal molding.
3. Remove the molding.

INSTALLATION PROCEDURE

Windshield Side Reveal Molding Replacement: Installation Procedure:

1. Install the tab at the top of the side reveal molding (1) into the upper reveal molding.
2. Align the side reveal molding retainer clips to the windshield pillar flange.
3. Press down on the side reveal molding to engage the retainer clips.