Radiator Hose Replacement- Inlet

Remove Procedure
- Tools Required
- J 37097-A Hose Clamp Remover/Installer
- J 38185 Hose Clamp Pliers





1. Partially drain the cooling system. Refer to Draining and Filling Cooling System.
2. Remove the upper filler panel. Refer to Filler Panel Replacement - Upper.
3. Position the J 38185 (2) to the clamp in order to remove the inlet radiator hose (1) from the water housing crossover.





4. Position the J 37097-A to the clamp in order to remove the inlet radiator hose from the radiator.
5. Remove the inlet radiator hose from the vehicle.

Installation Procedure





1. Position the J 37097-A to the clamp in order to connect the inlet radiator hose to the radiator.





2. Position the J 38185 (2) to the clamp in order to connect the inlet radiator hose (1) to the water housing crossover.
3. Install the upper filler panel. Refer to Filler Panel Replacement - Upper.
4. Fill the cooling system. Refer to Draining and Filling Cooling System.