Wiper Gear Box: Service and Repair
WIPER TRANSMISSION REPLACEMENTTOOLS REQUIRED
^ J 39232 Wiper Linkage Separator
^ J 39529 Wiper Linkage Installer
REMOVAL PROCEDURE
1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the transmission drive link from the wiper motor crank arm using the J 39232.
4. Remove the 6 bolts.
5. Remove the wiper transmission assembly by guiding it through the access hole in the upper plenum panel.
INSTALLATION PROCEDURE
1. Position the wiper transmission assembly in the plenum chamber through the air inlet shroud upper panel openings.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 6 bolts.
Tighten
Tighten the bolts to 8 N.m (71 lb in).
3. Install the transmission drive link socket to the wiper motor crank arm ball using the J 39529.
4. Install the air inlet grille panel.
5. Install the wiper arms.