Removal and Replacement

Motor Replacement - Power Mirror

Removal Procedure





1. Remove the mirror face. Refer toMirror Face Replacement (Mirror Face Replacement) .
2. Remove the screws (2).
3. Disconnect the electrical connector.



Installation Procedure





1. Connect the electrical connector.
2. Align the motor to the mirror assembly.

Notice: Refer toFastener Notice in Cautions and Notices.

3. Install the screws (2).

Tighten the screws (2) to 1 Nm(9 lb in).

4. Install the mirror face. Refer toMirror Face Replacement (Mirror Face Replacement) .