Parts and Labor Information

PARTS INFORMATION

The new calibration number will be available for Techline Tools starting with the January 1996 CD # 1 release from the GM Service Technology Group (STG).

Important:
Do not attempt to order the calibration numbers from GMSPO. The calibrations are programmed into the vehicle's Powertrain Control Module via a Techline Tool device.

A phone call will be required to properly reprogram the vehicle with the new calibration. Call the Techline Customer Support Center (TCSC) at:

English 1-800-828-6860

French 1-800-503-3222





You will need the vehicle's VIN and the new calibration part number when you call TCSC. TCSC will provide you a special number. This number is called a VCI which stands for Vehicle Configuration Index. This number is unique for each vehicle. The number will update the PCM with the new calibration. TCSC will also update their data base so that a phone call will not be required after the next CD disc release.





The A.I.R.. kit, P/N 12539090, will be available from GMSPO after February 5, 1996. The kit will consist of the these parts:

WARRANTY INFORMATION







For vehicles repaired under warranty, use as shown.