Radiator Hose Replacement-Outlet

REMOVAL PROCEDURE
1. Drain the engine coolant.





2. Disconnect the (IAT) Intake Air Temperature sensor electrical connector.





3. Remove the air intake duct.





4. Remove the outlet hose from the water pump.
5. Raise and suitably support the vehicle.





6. Remove the outlet hose from the radiator.
7. Remove the hose support from the fan shroud.

INSTALLATION PROCEDURE





1. Install the outlet hose support to the fan shroud.
2. Install the outlet hose to the radiator.
3. Lower the vehicle.





4. Install the outlet hose to the water pump.





5. Install the air intake duct.





6. Connect the IAT sensor electrical connector.
7. Refill the engine coolant.