Vacuum Harness HVAC: Service and Repair

Vacuum Harness Color Code:

Remove or Disconnect

1. Negative battery cable.
2. Instrument panel pad. Refer to Instrument Panel Trim Pad in Instrument Panel, Gauges and Console.
3. Air distribution duct.
4. Vacuum lines from the vacuum actuators and vacuum tank.
5. Harness from control

Install or Connect

1. Harness to control assembly.
2. Vacuum lines to the vacuum actuators.
3. Air distribution duct.
4. Instrument Panel Trim Pad.
5. Negative battery cable.

Tighten
^ Bolt to 16 N.m (12 lb ft).