Center Mounted Brake Lamp: Service and Repair

REMOVAL PROCEDURE
1. Remove the rear window panel trim.
2. From the rear compartment, push up on the high mount stoplamp ratchet mechanism.
3. Slide the high mount stoplamp (1) forward.
4. Disconnect the high mount stoplamp wire harness connector.
5. Remove the high mount stoplamp (1).

INSTALLATION PROCEDURE
1. Connect the high mount stoplamp wire harness connector.
2. Use the following procedure in order to install the high mount stoplamp (1):
2.1. Insert the tabs into the slots at the rear window shelf.
2.2. Push forward on the high mount stoplamp until the high mount stoplamp is secure against the back window.
2.3. Install the rear window panel trim.