Gear Outlet Hose

Power Steering Line And Hose Routing:

REMOVE OR DISCONNECT
1. Position rags under pump to absorb oil.
2. Siphon fluid from reservoir.
3. Gear outlet hose from pump after sliding spring clamp back.
4. Line retainer (if applicable).
5. Gear inlet hose assembly from rack and pinion steering gear.
6. Gear outlet hose assembly from rack and pinion steering gear.
7. Gear outlet pipe and/or hose from vehicle.

INSTALL OR CONNECT
1. Gear outlet hose assembly into position on vehicle.
2. Gear outlet hose assembly to rack and pinion steering gear.

Tighten
^ Outlet hose assembly to 27 Nm (20 ft. lbs.).

3. Gear inlet hose assembly to rack and pinion steering gear.

Tighten
^ Hose assembly to 27 Nm (20 ft. lbs.).

4. Line retainer (if applicable).
5. Gear outlet hose to pump and hose clamp.

Important: Fill with fluid and bleed air from power steering system. Refer to BLEEDING THE POWER STEERING SYSTEM.

Inspect
^ For leaks.