License Lamp Replacement

REMOVAL PROCEDURE




1. Remove the nearest inner tail lamp.
Access the license lamp through the taillamp opening.
2. Remove the socket from the license lamp assembly.
Rotate the socket counter clockwise to disengage the locking tabs.




3. Reach through the taillamp opening and hold the license lamp assembly in place, while removing the screws securing the lamp assembly to the rear fascia.
4. Remove the license lamp assembly through the taillamp opening.

INSTALLATION PROCEDURE




1. Install the license lamp assembly through the taillamp opening.
2. Position the lamp assembly and hold in place.

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the screws securing the lamp assembly to the rear fascia.

Tighten
Tighten the license lamp assembly retaining screws to 2 N.m (18 lb in).




4. Install the socket to the license lamp assembly. Rotate the socket clockwise to engage the locking tabs.
5. Install the inner taillamp.