Removal Procedure

Removal Procedure

- Tools Required
- J 42120 Steering Wheel Puller Legs
- J 1859-A Steering Wheel Puller
- J 42640 Steering Column Lock Pin





1. Remove the steering wheel inflator module.
2. Remove the horn electrical connector.
3. Install J 42640 to the steering column.
4. Remove the steering wheel set nut.
5. Discard the steering wheel set nut.
6. Install J 42120 and J 1859-A to the steering wheel.
7. Tighten the puller center screw against steering column shaft until the steering wheel slides off the steering column shaft.
8. Remove J 42120 and J 1859-A from the steering wheel.