Center Mounted Brake Lamp: Service and Repair

High Mounted Stoplamp Replacement

REMOVAL PROCEDURE




1. Open the rear compartment.
2. Remove the screws from the high mounted stop lamp.
3. Depress the retainers holding the high mounted stop lamp to the inner panel of the compartment lid.
4. Remove the high mounted stop lamp from the rear compartment lid inner panel.




5. Disconnect the electrical connector from the high mounted stop lamp.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the high mounted stop lamp.




2. Install the high mounted stop lamp pressing in until the retainers are fully seated.
3. Install the screws to the high mounted stop lamp.

Tighten
Tighten the screws to the high mounted stop lamp to 2 N.m (18 lb in).

4. Close the rear compartment.