Power Seat Switch: Service and Repair

Power Seat Switch Replacement

Removal Procedure




1. Remove the seat back recliner handle.
2. Remove the seat cushion outer trim panel (5).
3. Disconnect the seat power switch electrical connector.
4. Remove the seat power switch (9).

Installation Procedure






Notice: Refer to Fastener Notice in Service Precautions.

1. Install the seat power switch (9).

Tighten the seat power switch screws to 1 N.m (9 lb in).

2. Connect the electrical connector.
3. Install the seat cushion outer trim panel (5).
4. Install the seat cushion outer trim panel (5) screws.

Tighten the seat cushion outer trim panel (5) screws to 1 N.m (9 lb in).

5. Install the seat back recliner handle.
6. Install the seat back recliner handle screws.

Tighten the seat back recliner handle screws to 1 N.m (9 lb in).