Power Mirror Switch: Service and Repair

POWER MIRROR SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Using a small flat-bladed tool to release the power accessory switch panel retainers (1) from the door trim panel, push in and lift up. Start at the front of the panel.




2. Disconnect the electrical connector (1) from the power mirror switch.
3. Release the power mirror switch retainers in order to remove the power mirror switch from the panel.

INSTALLATION PROCEDURE




1. Install the power mirror switch to the panel by pressing it into the retainer tabs until fully seated.
2. Connect the electrical connector (1) to the power mirror switch.




3. Install the power accessory panel to the door trim panel by pressing until the retainers (1) are fully seated.