Fluid Filter - A/T: Service and Repair

Oil Filter and Seal Replacement

- Tools Required
- J 6125-1B Slide Hammer
- J 23129 Axle Boot Remover
- J 36850 petroleum jelly

Removal Procedure





1. Remove the transaxle oil pan.
2. Remove the oil filter. Use a long screwdriver in order to pry the oil filter neck out of the seal.
3. Check the oil filter seal for damage or wear.
4. As needed, remove the seal using the J 6125-1B and the J23129.

Installation Procedure





1. Install a new seal, as needed. Before installing, coat the new seal with a small amount of J 36850 or petroleum jelly.
2. Install a new filter into the case.
3. Install the transaxle oil pan.