Trim Replacement - Body Lock Pillar

Trim Replacement - Body Lock Pillar

Removal Procedure

1. Remove the rear seat back bolster from the vehicle if equipped with split/folding rear seat back.
2. Remove the rear seat back from the vehicle if equipped with a stationary rear seat back.
3. Remove the rerouter retainer from the children shoulder belt, if necessary.




4. Remove the lock pillar lower trim panel retainer (2).
5. Remove the lock pillar lower trim panel (1) by disengaging the tabs from the clips.

Installation Procedure




1. Install the pillar lower trim panel (1).

1. Align and engage the pillar lower trim panel tabs to the clips.
2. Apply pressure to the pillar lower trim panel (1) in order to fully engage the tabs.

2. Install the lock pillar lower trim panel retainer (2).
3. Install the rerouter retainer to the children shoulder belt.
4. Install the rear seat back bolster to the vehicle.
5. Install the rear seat back to the vehicle.