Arm Rest: Service and Repair

Armrest Replacement - Rear Seat

Removal Procedure




1. Lower the rear seat backs.
2. Remove the retaining clips and reposition the rear seat back cover.
3. Remove the nuts and the armrest.

Installation Procedure





Notice: Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the armrest with the nuts.

Tighten the armrest nuts to 24 Nm (18 lb ft).

2. Install the rear seat back backside cover with the retaining clips.
3. Raise and secure the rear seat backs in the upright position.