Seat Back Cover

SEAT BACK COVER

REMOVAL

1. Remove the seat.
2. Unzip the seat back cover and expose the recliner bolts.

Fig. 8:

3. Remove the recliner bolts and remove the seat back. (Fig. 8)
4. Disconnect the j-straps at the bottom of the seat back.
5. Remove the seat back cover hog rings.

Fig. 9:

6. Position the seat back cover/cushion aside and release the seat belt pass through bezel locking tabs. (Fig. 9)
7. Remove the seat belt pass through bezel.
8. Remove the seat back cushion cover and cushion.

INSTALLATION

1. Install the seat back cushion and cover onto the seat back frame.
2. Install new hog rings.
3. Lock j-straps at the bottom of the seat back
4. Install the seat belt pass through bezel and seat the locking tabs fully.
5. Install the seat back onto the recliners and install the bolts.
6. Tighten the bolts to 28 N.m (21 ft.lbs.).
7. Complete seat back cover installation by zipping up the cover.
8. Install the seat.