Shift Cable: Adjustments

1. If removed, install transaxle right side support bracket attaching bolts and torque to 30 ft-lbs.
2. If removed, torque the two rear engine to transaxle cradle attaching bolts to 62 ft-lbs.
3. Unlock cable adjuster clip by popping up the lock tab.
4. Place shift lever in D (drive) position.
5. Shift transaxle selector lever completely forward, then back 2 detent positions.
6. Snap the cable end into the transaxle outer lever ball stud.
7. In this position and with the shifter hanging under the vehicle, snap the adjustment lock into lock position.