Battery Tray

REMOVAL

1. Remove battery from vehicle.

Note: When the battery has been disconnected or reconnected, volatile memory information will be lost. The affected systems will have to be programmed by the technician or customer. These systems include radio station presets and clock settings.

INSTALLATION

1. Position battery tray to front fender apron in engine compartment.
2. Install retaining bolts and washers. Tighten each to 9-14 N.m (80-123 lb-in).
3. Install battery in battery tray.






4. Tighten battery mounting screw and washer to 9-14 N.m (80-123 lb-in).

NOTE: When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module (PCM) relearns its fuel trim. The vehicle may need to be driven 18 km (10 miles) or more to relearn the fuel trim.