Camshaft Bearing

General
Bearing Inside Diameter 27.012-26.987 mm (1.063-1.062 inch)

Tightening Specifications





NOTE: Each camshaft bearing cap is tightened individually.

Step 1: Tighten camshaft bearing cap to 8-12 Nm (71-106 inch lbs.).
Step 2: Loosen 14 camshaft bearing cap retaining bolts approximately two turns or until head of bolt is free.
Step 3: Retighten all bolts in sequence to 8-12 Nm (71-106 inch lbs.).