Liquid Vapor Separator: Testing and Inspection

The Fuel Vapor Vent Valve (FVV) assembly is mounted on the top of the fuel tank. It is used to control the flow of fuel vapors entering the EVAP system. The head portion of the assembly prevents the fuel tank from overfilling during refueling. The assembly also has a spring float, which prevents liquid fuel from entering the vapor delivery system under severe handling or vehicle roll over conditions. In the upright position the open bottom of the float will lift and shut off the orifice. Under severe handling conditions, the spring will push the float closed. This will not allow liquid fuel to reach the orifice. In a roll over condition the weight of the open bottom float and spring pressure will close the orifice.